You are reading the State of New Jersey Job Descriptions. This is not a Job Vacancy Announcement.

Job Specification

BODY AND FENDER MECHANIC

 DEFINITION:
 
 Under supervision, performs tasks involved in maintaining and repairing
 the bodies and fenders of trucks, automobiles, and other motorized
 equipment; does other related duties.

 NOTE:  The examples of work for this title are for illustrative
 purposes only. A particular position using this title may not perform
 all duties listed in this job specification. Conversely, all duties
 performed on the job may not be listed.

 EXAMPLES OF WORK

 Inspects vehicles to determine nature and extent of repairs.

 Dismantles damaged parts.

 Repairs minor surface dents using a hammer and block.

 Rolls and sketches metal to correct major damages.

 Straightens bodies and fenders.

 Welds and fills rips and tears in bodies and fenders.

 Cleans and primes repaired parts.

 Reassembles repaired parts.

 Mixes, applies, and finishes paint, enamels, and lacquers.

 Applies transfer seals and lettering with transfer cement.

 Maintains records.

 Will be required to learn to utilize various types of electronic
 and/or manual recording and information system used by the 
 agency, office, or related units.

 REQUIREMENTS

 TRAINING:
 
 Successful completion of a formal training course in 
 automotive body repair at an accredited community college 
 or vocational school.

 EXPERIENCE:

 Two (2) years of experience in motor vehicle body and fender
 repair work.

 NOTE:  Applicants who do not possess the required year of formal
 training may substitute one (1) additional year of experience as
 outlined above.

 LICENSES AND CERTFICATIONS

 Appointees must possess a driver's license valid in New Jersey.

 Appointees may be required to obtain a valid Commercial Driver's
 License (CDL) and applicable endorsements for the class and type 
 of vehicle being operated.

 NOTE:  The responsibility for ensuring that employees possess the
 required motor vehicle license, commensurate with the class 
 and type of vehicle operated, rests with the Appointing Authority.

 In accordance with Federal regulation 82:40, appointees
 responsible for the repair or servicing of motor vehicle air
 conditioners are required to possess and maintain a valid
 certification as an Air Conditioning and Refrigeration 
 Technician, commensurate with the type of equipment 
 serviced, issued by the Federal Environmental Protection
 Agency.

 In accordance with N.J.A.C. 13:20-46.8, appointees responsible 
 for performing the emissions inspections on diesel-powered 
 vehicles will be required to successfully complete a course of 
 Instruction on Diesel Emission Inspection provided through the 
 Appointing Authority.  Appointees may be required to successfully 
 complete re-training.

 In accordance with the New Jersey Occupational Safety and 
 Health Administration regulation 29 CFR 1910.178(l) (1), 
 appointees responsible for the operation of industrial trucks 
 (powered forklifts) will be required to obtain and maintain a current 
 certification as a Powered Industrial Truck Operator issued by 
 the New Jersey Occupational Safety and Health Administration.  
 Appointees may be required to successfully complete re-training.

 In accordance with N.J.A.C. 13:20-45.16, appointees responsible 
 for performing emissions repairs to gasoline-fueled vehicles will 
 be required to successfully complete the Emissions Technical 
 Educational Program, and maintain a current certification as an 
 Emissions Repairer Technician.

 In accordance with N.J.A.C. 13:20-43.17, appointees responsible 
 for performing inspections to motor vehicles will be required to 
 successfully complete the training and maintain a current certification 
 as a Motor Vehicle Inspector.

 Appointees responsible for repairing or servicing motor vehicles 
 equipped for alternate fuel are required to successfully complete 
 training and maintain a valid Alternate Fuel Certification.  
 Appointees who possess an ASE Certification in Alternate Fuel 
 are considered to have met this requirement.

 Appointees responsible for repair and servicing of 
 suspension/steering systems are require to obtain an
 Automobile Service Excellence (ASE) Certification in
 Suspension and Steering.

 Appointees responsible for repairing and servicing of brakes
 are required to possess and maintain a valid Automotive
 Service Excellence (ASE) Certification in Brake Repairs.
 
 Appointees may also be required to obtain ASE certifications
 in Engine Repair A-1 and Engine Performance A-8.

 Affected appointees are required to maintain valid certifications
 and successfully complete the re-certification processes within
 the timeframes mandated by statute.

 KNOWLEDGE AND ABILITIES

 Knowledge of equipment, tools, materials, and methods used 
 to repair motor vehicle bodies and fenders.

 Knowledge of the methods used to dismantle and assemble 
 automotive bodies.

 Knowledge of welding techniques needed to repair auto fenders 
 and bodies.

 Knowledge of methods used to mix and apply paint.

 Ability to mix and apply automobile paint.

 Ability to inspect damaged vehicles and determine nature of repairs.

 Ability to dismantle, repair, and reassemble bodies and fenders.

 Ability to maintain equipment, tools, and supplies in an orderly, 
 and safe condition.

 Ability to maintain records of work done, materials used, and 
 time spent.

 Ability to utilize various types of electronic and/or manual recording
 and information systems used by the agency, office, or related units.

 Ability to read, write, speak, understand, and communicate in 
 English sufficiently to perform duties of this position.  American 
 Sign Language or Braille may also be considered as acceptable 
 forms of communication.

 Persons with mental or physical disabilities are eligible as long
 as they can perform essential functions of the job with or without
 reasonable accommodation.  If the accommodation cannot be 
 made because it would cause the employer undue hardship, 
 such persons may not be eligible.


This job specification is applicable to the following title code:
Job
Spec
Code
VariantState,
Local or
Common
Class of
Service
Work
Week
State
Class
Code
Local
Class
Code
Salary
Range
Note
05133LC N/A15-

This job specification is for local government use only.
Salary range is only applicable to state government.
Local salaries are established by individual local jurisdictions.

7/24/2018